1、 IEC 60984 Edition 2.0 2014-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Live working Electrical insulating sleeves Travaux sous tension Protge-bras isolants lectriques IEC 60984:2014-07(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unl
2、ess otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have
3、 any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publicat
4、ion ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsi
5、rez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About th
6、e IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by
7、the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Te
8、chnical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects,
9、 replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online d
10、ictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electr
11、otechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give
12、 us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait
13、llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catal
14、ogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La
15、recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvel
16、les publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en angl
17、ais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles T
18、ermes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez
19、-nous: csciec.ch. IEC 60984 Edition 2.0 2014-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Live working Electrical insulating sleeves Travaux sous tension Protge-bras isolants lectriques INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE X ICS 13.260; 29.240.20; 29
20、.260.99 PRICE CODE CODE PRIX ISBN 978-2-8322-1782-5 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assur
21、er que vous avez obtenu cette publication via un distributeur agr. 2 IEC 60984:2014 IEC 2014 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope 8 2 Normative references 8 3 Terms and definitions 8 4 Requirements 9 4.1 General . 9 4.2 Classification 9 4.3 Physical requirements . 10 4.3.1 Composition 10 4
22、.3.2 Shape 10 4.3.3 Dimensions 11 4.3.4 Thickness 12 4.3.5 Workmanship and finish . 12 4.4 Mechanical, climatic and environmental requirements . 12 4.5 Electrical requirements . 13 4.6 Marking . 13 4.7 Packaging . 13 4.8 Instructions for use . 14 5 Tests . 14 5.1 General . 14 5.2 Visual and dimensio
23、nal inspection 14 5.2.1 General . 14 5.2.2 Classification . 14 5.2.3 Composition 14 5.2.4 Shape 14 5.2.5 Dimensions 15 5.2.6 Thickness 15 5.2.7 Workmanship and finish . 16 5.3 Marking . 16 5.3.1 Visual and dimensional inspection . 16 5.3.2 Durability of marking 16 5.4 Packaging and instructions for
24、use 17 5.5 Mechanical tests . 17 5.5.1 General . 17 5.5.2 Tensile strength and elongation at break . 17 5.5.3 Resistance to mechanical puncture . 18 5.5.4 Tension set 20 5.6 Dielectric tests 21 5.6.1 Type test . 21 5.6.2 Alternative tests in case of sleeves having completed the production phase 23 5
25、.7 Ageing tests 24 5.8 Thermal tests 24 5.8.1 Low temperature test . 24 5.8.2 Flame retardancy test 25 IEC 60984:2014 IEC 2014 3 5.9 Tests on sleeves with special properties . 26 5.9.1 Category A Acid resistance . 26 5.9.2 Category H Oil resistance . 26 5.9.3 Category Z Ozone resistance . 26 5.9.4 C
26、ategory C Extremely low temperature resistance 27 6 Conformity assessment of sleeves having completed the production phase . 27 7 Modifications . 27 Annex A (informative) In-service recommendations 28 A.1 General . 28 A.2 Storage prior to issue and between use 28 A.3 Examination before use 28 A.4 Te
27、mperature . 28 A.5 Precautions in use 28 A.6 Periodic inspection and electrical retesting . 29 A.6.1 General . 29 A.6.2 Electrical retesting Additional mounting methods for the sleeves 29 Annex B (normative) Suitable for live working; double triangle (IEC 60417-5216:2002- 10). 33 Annex C (normative)
28、 Chronological order for type tests . 34 C.1 General . 34 C.2 Group size requirements . 36 C.2.1 Group 1 . 36 C.2.2 Group 2 . 36 C.2.3 Group 3 . 36 C.2.4 Group 4 Additional test for sleeves of category A 36 C.2.5 Group 5 Additional test for sleeves of category H . 36 C.2.6 Group 6 Additional test fo
29、r sleeves of category Z 36 Annex D (informative) Guidelines for the selection of the class of sleeve in relation to a.c. nominal voltage of a system 37 Annex E (informative) Recommendations for d.c. electrical tests and voltage use 38 E.1 General . 38 E.2 DC dielectric tests . 38 E.2.1 Test equipmen
30、t 38 E.2.2 Test procedure 38 E.3 Recommended maximum use voltage in d.c. installations . 39 Annex F (normative) Liquid for tests on sleeves of category H Oil resistance . 40 F.1 Particularities of liquid 102 40 F.2 Characteristics of oil no. 1 40 Annex G (normative) Classification of defects and tes
31、ts to be allocated . 41 Annex H (informative) Rationale for the classification of defects 42 Bibliography 43 Figure 1 Style A: straight taper sleeve . 10 Figure 2 Style B, curved elbow sleeve . 11 Figure 3 Dial-micrometer for measuring sleeve thickness . 16 Figure 4 Dumb-bell test piece for mechanic
32、al tests (plan view) 17 Figure 5 Test plates and needle for resistance to mechanical puncture . 19 4 IEC 60984:2014 IEC 2014 Figure 6 Water electrodes, straight mounting . 22 Figure 7 Set-up for low and extremely low temperature folding tests 24 Figure 8 Flame retardancy test set-up 25 Figure A.1 Wa
33、ter electrodes, inverted mounting . 30 Figure A.2 Water electrodes, sling mounting 31 Figure A.3 Dry electrodes, straight mounting . 32 Table 1 Special properties . 9 Table 2 Dimensions* 11 Table 3 Maximum sleeve thickness 12 Table 4 Sampling plan . 18 Table 5 Clearance between electrodes 21 Table 6
34、 Test voltage 23 Table C.1 General type test procedure . 35 Table D.1 Designation of maximum use a.c. voltage 37 Table E.1 Clearance between electrodes . 38 Table E.2 DC test voltage 39 Table E.3 Maximum use voltage 39 Table F.1 Characteristics of oil no. 1 40 Table G.1 Classification of defects and
35、 associated requirements and tests 41 Table H.1 Justification for the type of defect 42 IEC 60984:2014 IEC 2014 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LIVE WORKING ELECTRICAL INSULATING SLEEVES FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for sta
36、ndardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes I
37、nternational Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may partici
38、pate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement betw
39、een the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publicatio
40、ns have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for an
41、y misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding
42、 national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any serv
43、ices carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC Nat
44、ional Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention
45、is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC sha
46、ll not be held responsible for identifying any or all such patent rights. International Standard IEC 60984 has been prepared by IEC technical committee 78: Live working. This second edition cancels and replaces the first edition, published in 1990 and its Amendment 1 published in 2002. It constitute
47、s a technical revision. The major changes are: removal of the requirement for an area to mark the date of inspection; only the straight mounting method with water electrodes is specified for the dielectric type test; the d.c. electric tests are no longer included in the normative part of the documen
48、t, but a d.c. test is suggested at the production level where a d.c. use of sleeves is expected, as presented in a new informative Annex E; preparation of the elements of evaluation of defects, and general application of IEC 61318:2007; 6 IEC 60984:2014 IEC 2014 the normative Annex E on sampling pro
49、cedure has been deleted (not applicable according to IEC 61318:2007 ); the informative Annex F on acceptance and complementary tests has been deleted (consideration now included in IEC 61318:2007); in the new normative Annex F, updating of the characteristics of the liquid specified for tests on sleeves of category H, according to the latest edition of ISO 1817; introd
