1、 IEEE Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1TMPackage B Version 001.001 Sponsored by the Standards Development Board IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Communications Society IEEE Std 1904.1/Conform
2、ance02-2014 (Conformance to IEEE Std 1904.1-2013) IEEE Std 1904.1/Conformance02-2014 (Conformance to IEEE Std 1904.1-2013) IEEE Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1 Package B Version 001.001 Sponsor Standards Deve
3、lopment Board of the IEEE Communications Society Approved 3 November 2014 IEEE-SA Standards Board Abstract: This standard specifies a suite of conformance tests for system-level requirements of Ethernet Passive Optical Network (EPON) equipment, defined in IEEE 1904.1 Package B. Keywords: 1G-EPON, 10
4、G-EPON, conformance, Conformance02, EPON, Ethernet Passive Optical Network, IEEE 1904.1, Package B, SIEPON The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2015 by The Institute of Electrical and Electronics Engineers, Inc. All rights
5、reserved. Published 16 February 2015. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all co
6、nditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provi
7、de other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing an
8、d making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upo
9、n his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPEC
10、IAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERW
11、ISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the
12、 event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or
13、inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or he
14、r views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide co
15、nsulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any r
16、esponses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has prev
17、iously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, I
18、EEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements.
19、Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyright
20、s IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulati
21、on, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE wil
22、l grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive
23、, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents
24、 may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or er
25、rata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the
26、art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/i
27、eeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA We
28、bsite at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publicat
29、ion of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA We
30、bsite at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of a
31、ny unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the
32、 legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determi
33、nation of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Copyright 2015 IEEE. All rights reserved. vi Participants At the time this standard was submitted t
34、o the IEEE-SA Standards Board for approval, the SIEPON Working Group had the following membership: Glen Kramer, Working Group Chair Ken-Ichi Suzuki, Working Group Vice Chair Zhou Zhen, Executive Secretary Toshihiko Kusano, Conformance Test Procedures Task Force Chair Motoyuki Takizawa, Conformance T
35、est Procedures Task Force Editor The following individuals submitted technical contributions or commented on the standard at various stages of the project development: James Chen, Hitachi, Ltd Raziel Gabe, PMC Sierra Marek Hajduczenia, Bright House Networks (formerly with ZTE Corporation) Lior Kherm
36、osh, PMC Sierra Curtis Knittle, CableLabs Shinichi Kouyama, Sumitomo Electric Industries, Ltd. Glen Kramer, Broadcom Corporation Toshihiko Kusano, Oliver Solutions Ltd. Edwin Mallette, Bright House Networks Makoto Matsuoka, Hitachi, Ltd Daisuke Murayama, NTT Corporation Susumu Nishihara, NTT Corpora
37、tion Sadaichiro Ogushi, NEC Kazumi Onishi, Oki Electric Industry Co., Ltd. Hiroshi Ou, NTT Corporation Liu Qian, RITT, CATR Takeshi Suehiro, Mitsubishi Electric Corporation Ken-Ichi Suzuki, NTT Corporation Masashi Tadokoro, NTT Corporation Motoyuki Takizawa, Fujitsu Telecom Networks Lu Yang, RITT, C
38、ATR Zhou Zhen, FiberHome Technologies The following members of the entity balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention: Bright House Networks Broadcom Corporation Cable Television Laboratories, Inc. (CableLabs) FiberHome Technologies G
39、roup Fujitsu Telecom Networks Hitachi, Ltd. Huawei Technologies Co., Ltd. ISB Corporation Marvell Semiconductor, Inc. Oki Electric Industry Co., Ltd. Oliver Solutions, Ltd. PMC-Sierra, Inc. Research Institute of Telecommunications Transmission of Ministry of Industry and Information Technology (RITT
40、) Sumitomo Electric Industries, Ltd. Copyright 2015 IEEE. All rights reserved. vii When the IEEE-SA Standards Board approved this standard on 3 November 2014, it had the following membership: John Kulick, Chair Jon Walter Rosdahl, Vice-chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Se
41、cretary Peter Balma Farooq Bari Ted Burse Clint Chaplain Stephen Dukes Jean-Phillippe Faure Gary Hoffman Michael Janezic Jeffrey Katz Joseph L. Koepfinger* David Law Hung Ling Oleg Logvinov T. W. Olsen Glenn Parsons Ron Peterson Adrian Stephens Peter Sutherland Yatin Trivedi Phil Winston Don Wright
42、Yu Yuan *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Don Messina IEEE-SA Content Production and Management Soo Kim IEEE-SA Technical Program Operations Copyright 2015 IEEE. All r
43、ights reserved. viii Introduction This introduction is not part of IEEE Std 1904.1-Conformance02-2014, IEEE Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1 Package B Version 001.001. This standard builds upon the IEEE 1904.1
44、 Service Interoperability in Ethernet Passive Optical Networks (SIEPON) and specifies a suite of conformance tests for system-level requirements of Ethernet Passive Optical Network (EPON) equipment, defined in IEEE 1904.1 Package B. This standard supplements IEEE Std 1904.1 by providing test cases t
45、o verify key requirements for proper service establishment across the Optical Line Terminal (OLT) and Optical Network Units (ONUs) from different manufacturers. Interoperability between the OLT and ONUs is verified indirectly, by assessing conformance of individual devices to IEEE 1904.1 Package B r
46、equirements. Copyright 2015 IEEE. All rights reserved. ix Contents 1. Overview 1 1.1 Scope . 1 1.2 Purpose 1 1.3 Mandatory and optional requirements . 2 1.4 Test suite version and conformance test identifier . 2 1.4.1 Major and minor conformance test suite versions 2 1.4.2 Conformance test identifie
47、r 2 1.4.3 Updating conformance test identifier and test suite version . 2 1.5 Overview of clauses . 3 2. Normative references 4 3. Definitions, acronyms, and abbreviations 5 3.1 Definitions . 5 3.2 Acronyms and abbreviations . 5 3.3 Package B organizationally unique identifier (OUI) value 6 4. Test
48、equipment and test configuration 7 4.1 Functional requirements for test equipment 7 4.1.1 Introduction 7 4.1.2 Packet Analyzer . 7 4.1.3 PON Protocol Analyzer 7 4.1.4 Packet Generator 8 4.1.4.1 Size of Ethernet frame 8 4.1.5 ODN . 8 4.1.6 OLT Emulator 8 4.1.7 ONU Emulator . 9 4.2 Test equipment conf
49、igurations. 9 4.2.1 Introduction 9 4.2.2 ONU under test, without Packet Generator/Analyzer 9 4.2.3 OLT under test, without Packet Generator/Analyzer . 10 4.2.4 ONU under test, with Packet Generator/Analyzer . 10 4.2.5 OLT under test, with Packet Generator/Analyzer 11 4.3 Frame flow configurations . 12 5. Conformance map 14 5.1 Introduction . 14 5.2 Mapping between IEEE 1904.1 Package B PICS for ONU and test cases 14 5.3 Mapping between IEEE 1904.1 Package B PICS for OLT and test cases . 15 6. Common messages . 16 6.1 Message and TLV primitives . 16 6.1.1 Set_Request( TL
