1、INCH-POUND MIL-DTL-13791/19 15 January 2009 DETAIL SPECIFICATION SHEET IGNITION DISTRIBUTOR, CONTACT SET This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specificatio
2、n sheet and MIL-DTL-13791. FIGURE 1. Ignition distributor, contact set. . AMSC N/A FSC 2920 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-13791/19 2Inches mm .005 0.13.020 0.51.188 4.78.193 4.901.182 30.021.192 30.281.59 40.4NOTES: 1. Dimen
3、sions are in inches. 2. Metric equivalents are for information only. FIGURE 1. Ignition distributor, contact set - Continued. Dimensions and configurations: See figure 1. Referenced document. This document references MIL-DTL-13791. CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA -
4、CC Navy - SH DLA - CC (Project 2920-2008-019) Review activities: Army - CR, CR4 Navy - MC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
