1、Chapter 17 Complexation Reactions and Titrations,Complex-formation reactions are widely used in analytical chemistry. One of the first uses of these reagents was for titrating cations. In addition, many complexes are colored or absorb ultraviolet radiation; the formation of these complexes is often
2、the basis for spectrophotometric determinations. Some complexes are sparingly soluble and can be used in gravimetric analysis. Complexes are also widely used for extracting cations from one solvent to another and for dissolving insoluble precipitates. The most useful complex forming reagents are org
3、anic compounds that contain several electron donor groups that form multiple covalent bonds with metal ions.,FORMING COMPLEXESMost metal ions react with electron-pair donors to form coordination compounds or complexes. The donor species, or ligand is an ion or a molecule that forms a covalent bond w
4、ith a cation or a neutral metal atom by donating a pair of electrons that are then shared by the two.The number of covalent bonds that a cation tends to form with electron donors is its coordination number. Typical values for coordination numbers are two, four, and six. The species formed as a resul
5、t of coordination can be electrically positive, neutral, or negative.,A ligand that has a single donor group, such as ammonia, is called unidentate(single-toothed), whereas one such as glycine, which has two groups available for covalent bonding, is called bidenate. Tridentate, tetradentate, pentade
6、ntate, and hexadentate chelating agents are also known.Another important type of complex, a macrocycle, is formed between a metal ion and a cyclic organic compound. The selectivity of a ligand for one metal ion over another relates to the stability of the complexes formed. The higher the formation c
7、onstant of a metal-ligand complex, the better the selectivity of the ligand for the metal relative to similar complexes formed with other metals.,Producing Soluble CompelxesComplexation reactions involve a metal ion M reacting with a ligand L to form a complex ML.M + L MLComplexation reactions occur
8、 in a stepwise fashion, and the reaction above is often followed by additional reactions:ML + L ML2ML2 + L ML3MLn-1 + L MLnUnidentate ligands invariably add in a series of steps. With multidentate ligands, the maximum coordination number of the cation may be satisfied with only one or a few added li
9、gands.,continued The equilibrium constants for complex formation reactions are generally written as formation constants.M + 2L ML2 M + 3L ML3M + nL MLnThe overall formation constants are products of the stepwise formation constants for the individual steps leading to the product.,2,3,n,Forming Insol
10、uble SpeciesThe addition of ligands to a metal ion may result in insoluble species, such as the familiar nickel-dimethylglyoxime precipitate. In many cases, the intermediate uncharged complexes in the stepwise formation scheme may be sparingly soluble, whereas the addition of more ligand molecules m
11、ay result in soluble species. AgCl is insoluble, but addition of large excess of Cl- produces soluble AgCl2-, AgCl32-, and AgCl43-.,continued In contrast to complexation equilibria, which are most often treated as formation reactions, solubility equilibria are usually treated as dissociation reactio
12、nsMxAy(s) xMy+(aq) + yAx-(aq) Ksp = My+xAx-y where, Ksp = solubility product. Hence, for BiI3, the solubility product is written Ksp = Bi3+I-3.The formation of soluble complexes can be used to control the concentration of free metal ions in solution and thus control their reactivity.,TITRATION WITH
13、INORGANIC COMPLEXING AGENTSComplexation reactions have many uses in analytical chemistry, but their classical application is in complexometric titrations. Here, a metal ion reacts with a suitable ligand to form a complex, and the equivalence point is determined by an indicator or a suitable instrume
14、ntal method. The formation of soluble inorganic complexes is not widely used for titration but the formation of precipitates is the basis for many important determinations.,Complexation TitrationsThe progress of a complexometric titration is generally illustrated by a titration curve, which is usual
15、ly a plot of pM = -logM as a function of the volume of titrant added. Most often in complexometric titrations the ligand is the titrant and the metal ion the analyte, although occasionally the reverse is true. Many precipitation titrations use the metal ion as the titrant. Most simple inorganic liga
16、nds are unidentate, which can lead to low complex stability and indistinct titration end points.,continued As titrants, multidentate ligands, particularly those having four or six donor groups, have two advantages over their unidentate counterparts. First, they generally react more completely with c
17、ations and thus provide sharper end points. Second, they ordinarily react with metal ions in a single-step process, whereas complex formation with unidentate ligands usually involves two or more intermediate species.,Precipitation Titratons (Chapter 13)Precipitation titrimetry, which is based on rea
18、ctions that yield ionic compounds of limited solubility, is one of the oldest analytical techniques. The slow rate of formation of most precipitates, however, limits the number of precipitating agents that can be used in titrations to a handful. The most widely used and important precipitating reage
19、nt, silver nitrate, which is used for the determination of the halogens, the halogen-like anions. Titrations with silver nitrate are sometimes called argentometric titrations.,The Shapes of Titration CurvesTitration curves for precipitation reactions are derived in a completely analogous way to the
20、methods described for titrations involving strong acids and strong bases. P-functions are derived for the preequivalence-point region, the postequivalence point region, and the equivalence point for a typical precipitation titraton.Most indicators for argentometric titrations respond to changes in t
21、he concentration of silver ions. As a consequence, titraton curves for precipitation reactions usually consist of a plot of pAg versus volume of AgNO3.,End Point for Argentometric TitrationsThree types of end points are: (1) chemical, (2) potentiometric, (3) amperometric. Potentiometric end points a
22、re obtained by measuring the potential. To obtain an amperometric end point, the current generated between a pair of silver microelectrodes is measured and plotted as a function of reagent volume. The chemical end point consists of a color change or the appearance or disappearance of turbidity. The
23、requirements are (1) the color change should occur over a limited range in the p-function, and (2) the color change should take place within the steep portion of the titration curve.,Formation of a Colored Precipitate The Mohr MethodSodium chromate can serve as an indicator for the argentometric det
24、ermination of chloride, bromide, and cyanide ions by reacting with silver ion to form a brick-red silver chromate (Ag2CrO4) precipitate in the equivalence-point region. The reactions involved in the determination of chloride and bromide (X-) are titration reaction: Ag+ + X- AgX(s) whiteindicator rea
25、ction: 2Ag+ + CrO42- Ag2CrO4(s) redThe solubility of silver chromate is several times grater than that of silver chloride or silver bromide.,Adsorption Indicators: The Fajans MethodAn adsorption indicator is an organic compound that tends to be adsorbed onto the surface of the solid in a precipitati
26、on titration. Ideally, the adsorption occurs near the equivalence point and results not only in a color change but also in a transfer of color from the solution to the solid (or the reverse).Fluorescein is a typical adsorption indicator useful for the titration of chloride ion with silver nitrate. I
27、n aqueous solution, fluorescein partially dissociates into hydronium ions and negatively charged fluoresceinate ion that are yellow-green. The fluoresceinate ion forms an intensely red silver salt. Titrations involving adsorption indicators are rapid, accurate, and reliable.,The Volhard Method (Colo
28、red Complex)In the Volhard method, silver ions are titrated with a standard solution of thiocyanate ion:Ag+ + SCN- AgSCN(s)Iron (III) serves as the indicator. The solution turns red with the first slight excess of thiocyanate ion:Fe3+ + SCN- Fe(SCN)2+ redThe titration must be carried out in acidic s
29、olution to prevent precipitation of iron (III) as the hydrated oxide.,3,-,2+,3+,continuedThe most important application of the Volhard method is for the indirect determination of halide ions. A measured excess of standard silver nitrate solution is added to the sample, and the excess silver ion is d
30、etermined by back-titration with a standard thiocyanate solution.,ORGANIC COMPLEXING AGENTS (Chapter 17)Many different organic complexing agents have become important in analytical chemistry because of their inherent sensitivity and potential selectivity in reacting with metal ions. Such reagents ar
31、e particularly useful in precipitating metal and in extracting metal from one solvent to another. The most useful organic reagents form chelate complexes with metal ions.,Reagents for Precipitating MetalsOne important type of reaction involving an organic complexing agent is that in which an insolub
32、le, uncharged complex is formed. Usually, it is necessary to consider stepwise formation of soluble species in addition to the formation of the insoluble species. Thus, a metal ion Mn+ reacts with a complexing agent X- to form MX(n-1)+, MX2(n-2)+, MXn-1+, and MXn(soln).Mn+ + nX- MXn(soln) MXn(solid)
33、 MXn(soln) Keq = MXnSolubility product expression is:Ksp = Mn+X-n = Keq / n,n+,-,n,Forming Soluble Complexes for ExtractionsMany organic reagents are useful in converting metal ions into form that can be readily extracted from water into an immiscible organic phase. Extraction are widely used to sep
34、arate metals of interest from potential interfering ions and for achieving a concentrating effect by extracting into a phase of smaller volume. Extractions are applicable to much smaller amounts of metals than precipitations, and they avoid problems associated with coprecipitation.,Ethylenediaminete
35、traacetic Acid (EDTA)Ethylenediaminetetraacetic acid also called (ethylenedinitrilo)tetraacetic acid, which is commonly shortened to EDTA, is the most widely used complexometric titrant. Fully protonated EDTA has the structureThe EDTA molecule has six potential sites for bonding a metal ion: the fou
36、r carboxyl groups and the two amino groups, each of the latter with an unshared pair of electrons. Thus, EDTA is a hexadentate ligand.,EDTA Is a Tetrabasic AcidThe dissociation constants for the acidic groups in EDTA are K1 = 1.02 X 10-2, K2 = 2.14 X 10-3, K3 = 6.92 X 10-7, and K4 = 5.50 X 10-11 . I
37、t is of interest that the first two constants are of the same order of magnitude, which suggests that the two protons involved dissociate from opposite ends of the long molecule. As a consequence of their physical separation, the negative charge created by the first dissociation does not greatly aff
38、ect the removal of the second proton. The various EDTA species are often abbreviated H4Y, H3Y-, H2Y2-, HY3-, and Y4-.,Reagents for EDTA TitrationsThe free acid H4Y and the dihydrate of the sodium salt, Na2H2Y.2H2O, are commercially available in reagent quality.Under normal atmospheric conditions, th
39、e dihydrate, Na2H2Y.2H2O, contains 0.3% moisture in excess of the stoichiometric amount. This excess is sufficiently reproducible to permit use of a corrected weight of the salt in the direct preparation of a standard solution. The pure dihydrate can be prepared by drying at 80oC for several days in
40、 an atmosphere of 50% relative humidity.,Nitrilotriacetic acid (NTA),The Nature of EDTA Complexes with Metal IonsSolutions of EDTA are valuable as titrants because the reagent combines with metal ions in a 1:1 ratio regardless of the charge on the cation.Ag+ + Y4- AgY3-Al3+ + Y4- AlY-EDTA is a remar
41、kable reagent not only because it forms chelates with all cation but also because most of these chelates are sufficiently stable for titrations. This great stability undoubtedly results from the several complexing sites within the molecule that give rise to a cagelike structure in which the cation i
42、s effectively surrounded and isolated from solvent molecules. The ability of EDTA to complex metals is responsible for its widespread use as a preservative in foods and in biological samples.,Indicators for EDTA TitrationsIndicators are organic dyes that form colored chelates with metal ions in a pM
43、 range that is characteristic of the particular cation and dye. The complexes are often intensely colored and are discernible to the eye at concentrations in the range of 10-6 to 10-7 M.Eriochrome Black T is a typical metal-ion indicator used in the titration of several common cations.H2O + H2In- HI
44、n2- + H3O+ K1 = 5 X 10-7red blueH2O + HIn2- In3- + H3O+ K2 = 2.8 X 10-12blue orangeThe acids and their conjugate bases have different colors.,continuedThe metal complexes of Eriochrome Black T are generally red, as is H2In-. Thus, for metal-ion detection, it is necessary to adjust the pH to 7 or abo
45、ve so that the blue form of the species, HIn2-, predominates in the absence of a metal ion. Until the equivalence point in a titration, the indicator complexes the excess metal ion so that the solution is red. With the first slight excess of EDTA, the solution turns blue as a consequence of the reac
46、tionMIn- + HY3- HIn2- + MY2-red blue,Titration Methods Employing EDTADirect Titration: Many of the metals in the periodic table can be determined by titration with standard EDTA solution. Some methods are based on indicators that respond to the analyte itself, whereas others are based on an added me
47、tal ion.Methods Based on Indicators for an Added metal Ion: In case where a good, direct indicator for the analyte is unavailable, a small amount of a metal ion for which a good indicator is available can be added. The metal ion must form a complex that is less stable than the analyte complex.,conti
48、nuedPotentionmetric Methods: Potential measurements can be used for end-point detection in the EDTA titration of those metal ion for which specific ion electrodes are available.Spectrophotometric Methods: Measurement of UV/visible absorption can also be used to determine the end points of titrations
49、. In these cases, an instrument responds to the color change in the titration rather than relying on a visual determination of the end point.,continued Back-Titration Methods: Back-titrations are useful for the determination of cations that form stable EDTA complexes and for which a satisfactory ind
50、icator is not available; the determination of thallium is an extreme example. The method is also useful for cations such as Cr(III) and Co(III) that react only slowly with EDTA. A measured excess of standard EDTA solution is added to the analyte solution. After the reaction is judged complete, the excess EDTA is back-titrated with a standard magnesium or zinc ion solution to an Eriochrome Black T or Calmagite end point.,
